Standard Electronic Dart Board Height: Official Measurements

Standard Electronic Dart Board Height: What Is the Correct Measurement?

The official electronic dart board height is measured to the center of the bullseye at 5 feet 8 inches (1.73 meters) from the floor. This standard applies to most competitive play and is the baseline for both electronic (soft-tip) and traditional (steel-tip) dart boards. Ensuring your electronic dart board height is correct guarantees consistent play, accurate scoring, and compatibility with tournament rules.

Why the 5'8 (1.73 m) Standard Matters

Setting the electronic dart board height to 5'8 (1.73 m) centers the playing plane for the average adult player and aligns with World Darts Federation (WDF) guidelines. This consistent reference point helps players develop repeatable throwing mechanics and ensures fairness in leagues and events. For businesses such as bars and entertainment centers, maintaining this standard also avoids confusion and promotes a professional appearance.

Throwing Distance: Electronic Dart Board Height and Oche Measurements

While the electronic dart board height refers to vertical placement, the throwing distance (from the oche to the board) is equally important. For steel-tip boards, the official throwing distance is 7 feet 9.25 inches (2.37 meters) from the throw line (oche) to the face of the board. For many electronic soft-tip games, a common standard is 8 feet (2.44 meters) from the oche to the board face. Make sure to set both height and distance correctly when installing an electronic dart board.

How to Measure Throwing Distance Accurately

To measure the throwing distance precisely: measure from the front of the dartboard (not the cabinet) horizontally to the oche line. For steel-tip (traditional) setups use 7'9.25 (2.37 m). For many electronic soft-tip setups, use 8'0 (2.44 m) unless a specific league requires otherwise. Some commercial electronic dart machines include a built-in footplate indicating the correct oche location—use that for the fastest and most accurate setup.

Comparison Table: Steel-tip vs Electronic (Soft-tip) Measurements

Mounting Your Electronic Dart Board: Step-by-Step Guide

Correct mounting ensures your electronic dart board height is accurate and stable. Follow these steps to mount any commercial or home electronic dart board safely and to specification.

Step 1 — Choose Location and Check Clearance

Pick a wall with enough space: a minimum of 1.5 meters (5 ft) wide and at least 8 ft (2.44 m) ceiling height is recommended. Ensure there’s clear throwing space and room for players to step back. Avoid locations near heavy foot traffic or fragile items.

Step 2 — Measure and Mark the Bullseye Height

From the floor, mark the target point at 5 ft 8 in (1.73 m). Use a reliable tape measure and a level to get a precise mark. This mark is the center of your bullseye; align the board so its center meets this mark.

Step 3 — Mount Using Manufacturer Instructions

Most electronic dart boards come with a mounting bracket or templates. Follow the included instructions; usually you mount the bracket at the marked height and hang the board so the bullseye sits at 5'8. For standalone electronic dart machines (coin-operated or free-play cabinets), follow the machine’s leveling and anchoring instructions and verify the bullseye height after assembly.

Step 4 — Set and Mark the Oche

Measure horizontally from the front face of the board to the dart-throwing line. For electronic dart board height setups, use the appropriate throwing distance (commonly 8 ft for soft-tip) and mark the oche clearly—either with a taped line, raised plastic plate, or permanent flooring strip.

Step 5 — Confirm and Test

Test with a few practice throws to ensure the board feels right and the distance matches expectations. Use a spirit level on the board surface and re-check the bullseye height if players report a mismatch.

Special Considerations for Electronic Dart Machines in Commercial Settings

When installing electronic dart machines in bars, arcades, or entertainment centers, additional factors matter beyond the electronic dart board height: power, ventilation, durability, and compliance with safety certifications. WillDarts, a leading manufacturer based in China, produces stand-up electric dart machines designed for commercial use, with CE and RoHS certifications and more than 20 patents to ensure reliable operation.

Power and Connectivity Needs

Electronic dart boards and machines require stable power. Check voltage requirements (common models run on 110–240V depending on the market) and ensure accessible outlets. For networked or cashless systems, factor in Ethernet or Wi-Fi connectivity and secure mounting to prevent tampering.

Durability and Service

Choose machines designed for continuous commercial use. WillDarts focuses on R&D and manufacturing of electric dart machines for bars, entertainment centers, and events—ensuring parts availability, warranty, and after-sales support for dealers and venue owners.

Accessibility and ADA Considerations for Electronic Dart Board Height

Accessible setups may require modified electronic dart board height or specialized oche lines for players in wheelchairs. For inclusive play, venues can install an additional lower bullseye height or use adjustable mounts for special events. Check local accessibility regulations for public venues and consider hosting adaptive play nights to welcome more customers.

Practical Tips for Accessible Play

Offer clear signage about standard measurements and alternate setups, provide portable ramps or seats as needed, and train staff to assist players in repositioning or adjusting equipment. Some organizations host dedicated adaptive tournaments—these use agreed-upon alternate measurements and should be communicated clearly to participants.

Common Installation Mistakes to Avoid

Even experienced installers can make mistakes—here are the most common and how to prevent them when setting electronic dart board height and layout.

Mistake 1 — Measuring to the Cabinet Instead of the Board Face

Many cabinets have depth; always measure horizontal oche distance to the front face of the board, not the cabinet surface. This ensures throwing distances match tournament standards and player expectations.

Mistake 2 — Ignoring Ceiling Height and Lighting

Insufficient ceiling height can force players to adjust throws, while poor lighting causes aiming errors. Install direct, non-glare lighting centered on the board and ensure at least 8 ft (2.44 m) overhead clearance for safe play.

Mistake 3 — Neglecting Wall Protection

Dart impacts can damage walls. Use backboards, cork pads, or full cabinets to protect surfaces. Many venues use dedicated dart wall panels that also improve the appearance and durability of the installation.

Why Choose a Trusted Manufacturer for Electronic Dart Board Installations

Selecting a reputable manufacturer like WillDarts ensures consistent product quality, accurate measurements, and professional support. WillDarts was founded in 2015 and has focused for a decade on R&D, production, and sales of electronic dart machines. Their products are widely used in bars, entertainment centers, clubs, homes, and events, and carry CE and RoHS certifications plus over 20 patents.

Commercial Benefits of Partnering with WillDarts

WillDarts offers dealer programs for worldwide partners, stable supply chains, and machines designed for heavy commercial use. If you run a venue or plan to distribute electronic dart machines, partnering with an experienced manufacturer reduces installation errors and ensures compliance with industry standards for electronic dart board height and distance.

Checklist: Final Verification Before Opening Play

Use this quick checklist to confirm your installation meets standards and provides a great player experience.

• Verify bullseye height is 5 ft 8 in (1.73 m) from the finished floor.
• Confirm horizontal oche distance to board face (7'9.25 for steel-tip, 8'0 common for electronic soft-tip unless otherwise specified).
• Check board level with a spirit level.
• Ensure lighting is even and non-glare.
• Install wall protection or backboard behind the board.
• Provide a clearly marked oche (tape, plate, or flush marker).
• Test power, connectivity, and any scoring or payment systems.

FAQ: Common Questions About Electronic Dart Board Height

Q: What is the standard electronic dart board height?

A: The standard electronic dart board height is 5 feet 8 inches (1.73 meters) from the floor to the center of the bullseye.

Q: Is the throwing distance different for electronic boards?

A: Yes. Steel-tip (traditional) throwing distance is 7 ft 9.25 in (2.37 m) to the face of the board. Electronic soft-tip setups commonly use 8 ft 0 in (2.44 m), but always follow specific league rules if applicable.

Q: How high should the cabinet be mounted for a stand-up electronic dart machine?

A: Mount the machine so the bullseye is at 5'8 (1.73 m). For stand-up machines, follow the manufacturer’s leveling and anchoring instructions and confirm the bullseye height after full assembly.

Q: Can I mount an electronic dart board lower for children or accessibility?

A: Yes. For youth leagues or accessible play, you can install a second board or use an adjustable mount. Make sure participants know the alternate measurements and have clear signage.

Q: Where can I buy professional electronic dart machines and get installation support?

A: WillDarts (https://www.willdarts.com/) is a leading electronic dart machine manufacturer founded in 2015, offering commercial-grade machines, R&D-driven designs, certifications (CE, RoHS), and dealer programs for worldwide partners. Contact them for product info, dealer opportunities, and installation advice.

For more information on products and dealer applications, visit WillDarts to explore models, certifications, and commercial solutions tailored for bars, entertainment centers, clubs, homes, and events.